Rev. : 1.0
P.3
KVM-SW-4 / KVM-SW-8 / KVM-SW-16
User Manual
2.
Introduction
As the server density increases, you run out of spaces in racks and server
room quickly. CV Series PS/2 KVM Switch is slim 1U form factor to provide
effective assistant for an administrator to control multiple PCs
All model are OSD(On-Screen-Display) menu equipped to simply the server
management. It fit different applications and can be cascaded together
expanding the capacity up to 128 computers, and providing the maximum
flexibility.
3.
Features
●
Multi-platform
-
Mix PCs, SUN Microsystems, IBM compatibles,
HP, Compaq and Dell.
●
Hot pluggable
-
Add PCs or remove connected PCs for
maintenance without powering down the PS/2
KVM switch or PCs.
●
No S/W required
-
Easy PC selection via on screen display manual,
push buttons and hot-key.
●
Built-in microprocessor emulation for each port boots up process.
●
High video quality with up to 1,920 x 1,440 and 200MHz bandwidth.
●
Name servers up to 16 characters long.
●
Scan mode with Monitor servers at intervals 5 to 99 seconds.
●
Support eight characters password protection and search PC server
name.
●
VGA, keyboard & mouse all-in-one by 15pin HDDB connector at KVM
side.
●
Cascade for use up to 128 servers.
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation
Summary of Contents for KVM-SW-16
Page 20: ......
