HSM-300Z
Z-Wave Curtain Control Adapter
3
Exclusion
Please enter to the excluding mode of HSK-100Z, and press & hold the program button of
HSM-300Z for 3 seconds and release it to complete the setting. Please following the steps:
1. Please open the cover located in the back of HSK-100Z to the back panel.
2. Press "CLEAR" button in Advance Setup keypad.
3. Press "DEVICE" button.
4. Press & hold the program button of HSM-300Z for 3 seconds and release it.
Connected to Curtain
The HSM-300Z provides 4 digital outputs to connect with curtain to enable up/down/stop control
over projector screen or window shades. The pin 1 is connects with "up", the pin 2 & 3 is "stop" &
"down", and the COM port is connects with Vcc or GND.
UP
STOP
DOWN
Vcc or GND
1
2
3
4
COM
Digital Output