ROOF ASSEMBLY
11
SIDE
WALL
FRONT WALL
BACK WALL
SIDE
WALL
TOP PLATE
BOTTOM PLATE
SELECT:
5 x 1.720 Roof Sheets
1 x 2.550 Spouting
2 x 1.720 Barges
32 x 40mm Weatherseal Nails
28 x Rivets
STEP 1:
Ensure Shed is sitting level and square.
Lay Roof Sheets on the Top Plates (with slots at front).
Rivet sheets together at overlaps with 2 x rivets per join
.
STEP 2:
Position the Roof Sheets with front overhang of 130mm at
each end (
fig. 1
).
Using 4 x 40mm weatherseals, nail the Roof Sheets to the
Top Plates at each corner, ensuring ribs on the Roof Sheets
line up with ribs on the Wall Sheets (
fig.2
).
STEP 3:
Ensure the Front and Back Top Plates are straight. Nail the
roof sheets to the front & back Top Plates, using 1 x nail per
pan (
fig.2
).
11
STEP 4:
Place Barge Flashings on roof at end of shed ensuring the
diagonal trimmed end is at the front.
Rivet the Barge Flashings to the roof and the side wall, us-
ing four rivets on top of barge and four into the side (
fig.3
).
fig.2
fig.3
X 4
X 4
Barge
IMPORTANT—FOR SHEDS WITH OPTIONAL CLEAR
ROOF PANEL
Assemble as below, making sure that the Clear Roof Sheets
overlap the standard roof sheets on both sides.
The Clear Roof Panel must be secured to the front and back
Top Plates. Pre drill and fasten with the 40mm weatherseal
nails provided.
.
fig.1
130mm
130mm
STEP 5:
Place spouting in position and rivet to Barge Flashings at
each end and rivet to roof sheets (1 rivet per 1 sheet).
