SAFETY
PRECAUTION
INITIAL
USE
ST
ART CALIBRA
TION
TARGET P
ATTERN KIT
PRODUCT PROFILE
ADAS Mobile
Calibration Tool
User Manual
20
www.newsmartsafe.com +86 755 84528537
2 Initial Use
2.1 Place the calibration frame
By default, it is folded for easier shipment. Follow the steps below to unfold it.
The heavy tool may tilt down and cause injuries, remember to always unfold the tool with the aid of a second
person.
1. Take out the calibration frame and place it on a flat ground.
2. Push the lever (14) upwards as indicated in the following figure, and then pull the rolling caster (13) down
on the ground.
3. Repeat step 2 for other two rolling casters.
4. Hold the handle (19) and raise the lifter up slightly off the ground, these rolling casters will be fully
unfolded and firmly sit on the ground automatically. Then lay the lifter down.
