Page 16
Channel Up:
Selects the next channel in the current channel list from
current bank. If your radio is in the end of the list, it will jump to the
first channel in your channel table (roll over)
Channel Down:
Selects the previous channel in the current channel list
from current bank. If your radio is in the first channel of the list, it will
jump to the last channel in your channel table (roll over)
Power Up:
Roll on the radio transmitting power. Possible values,
Low/Mid/High/Auto.
Power Down:
Change the radio transmitting power. Possible values,
Auto/High/Mid/Low.
Monitor:
Sets the radio in monitor mode. In this case, all the channel
activity is heard in the speaker. If there is no carrier on the frequency,
white noise is heard on the speaker. This mode overrides any signaling
on the channel.
Monitor Momentary:
The monitor function is active as long as the
button is pressed. When the button is released the radio squelch mode
is back to normal. This option only takes effect if is set in the press and
hold (long push mode). This mode temporary overrides any signaling on
the channel.
Signaling Override:
The CTCSS/DCS squelch mode is disabled. The radio
will open the speaker when carrier is detected. Also overrides MDC
signaling.
The power associated to High, Med or Low are adjusted by
your dealer or radio programmer.
Summary of Contents for ST-3118C
Page 38: ...Page 38 Notes ...
Page 39: ......
