Appendix A
– Troubleshooting
V33 User Manual
30
Enter the information in the section. Explanations of parameters are
described below. Click the
Apply / Save
button to add the entry in the
Active Outbound IP Filtering table.
IP Filtering
– Incoming
This window allows you to create a filter rule of
Incoming
.
Click
change default policy
to change the mode of policy.
Now default policy is
ACCEPT
, it means all incoming IP traffic from WAN
is accepted, but some IP traffic can be blocked by setting up filters.
If you are setting up the incoming IP filtering, click the
Add
button.
Now default policy is
BLOCK
, it means all incoming IP traffic from WAN is
blocked, but some IP traffic can be accepted by setting up filters.
If you are setting up the incoming IP filtering, click the
Add
button.