6
Solutions for the Balls are Obstructed
Step1:
Pull out the AC power plug and the power wire of the ball blender device.
Step2:
Install the ball separation board Into
undercarriage.(As figure shown
below)
Step3:
Evacuate the balls on undercarriage
Step4:
Loosen the butterfly shape nut.
Step5:
Lift up the robot. Take out the balls
form undercarriage. Check to see if
the balls are squished, distorted or
wrongly size. If so, do not put the
balls into the machine.
The AC Power plug
The power wire of the ball blender device
The ball separation board
The butterfly shape nut
Summary of Contents for Table Tennis Robot
Page 8: ......
