5
Disassembly
It takes only 2 minutes to disassemble this system.
1.Unplug the AC power cord.
2.Place your hands beside the base, lift the whole
system slightly and pull it back. Then you may
place the whole system on the table.
3.Gather the balls from the left and right ball
collecting trays in the base, then place the ball
separators from the sides to stop the balls from
falling.
4.Draw in the left and right pipes and gather them in
the base.
5.Return the ball collecting trays upwards to their
original positions (both sides).
6.Draw out the pipes of both sides from the iron
tubes and insert them to the holes at the left and
right sides of the supporting bracket.
A switching power supply is built into the system, to
accommodate all international voltages (AC 88V~
240V).
• After plugging, the robot server head will rotate to
its ready position. When the remote controller is
turned off (while aiming at the infrared sensor at
the system), the system will also return to its
original position.
• Please unplug the AC power cord if the system is
not to be in use for a period of time.
• If the left or the right ball collecting tray is taller
than the tabletop, the balls will not fall on the table,
so the pads should be changed to decrease the
angle of elevation.
• Before putting the balls into the machine, please
make sure their sizes are standard to avoid
possible breakdown of the system. Never use balls
other than 40 mm.
Cleaning and Maintenance
How to Clean the Shell
A soft piece of cloth is sufficient for moderate
soiling. If the system becomes dirty, please prepare
a 1:6 solution of soap and water and clean with a
soft piece of cloth, then dry with another dry cloth.
Never use strong solvents, such as alcohol, benzene
or other volatile cleansers.
To avoid accidents, always unplug the power cord
of the system while cleaning this device.
How to Maintain the System
Please wash the table tennis balls regularly to
remove dusts and hairs because these can cause a
malfunction of the system.
If the balls are distorted, squished or wrongly size,
stop using them to prevent further damage to system.
Summary of Contents for Table Tennis Robot
Page 8: ......
