Smartlink Medi-Link 100-824 Installation Manual Download Page 11

Page: 11 / 17

9.6 Programming CELLULAR

Option

Descriptions:

Warning! Do not adjust, refer to SmartLink.

“

10. CELLULAR

” is displayed. Press the HELP Button.

“Identity”

is displayed. Press the HELP Button.

The Medi-Link unit

displays the Identity Module numbers eg. “35976903185511” &
cannot be changed but are there for your reference only.

Press

the CANCEL Button to move to the next Program Option.

“Type”

is displayed. Press the HELP Button.

The Medi-Link unit

displays the Module Type eg. “SIMCOMSIM5216J” & cannot be
changed but are there for your reference only.

Press the CANCEL

Button to move to the next Program Option.

“Revision”

is displayed. Press the HELP Button.

The Medi-Link unit

displays the Revision eg. “1575B05SIM5216” & cannot be
changed but are there for your reference only.

Press the CANCEL

Button to move to the next Program Option.

“SIM Identity”

is displayed. Press the HELP Button.

The Medi-Link

unit displays the SIM Identity eg “89610188427072” & cannot be
changed but are there for your reference only.

Press the CANCEL

Button to move to the next Program Option.

“SIM Provider”

is displayed. Press the HELP Button.

The Medi-Link

unit displays the SIM Provider eg “Telstra Mobile” & cannot be
changed but are there for your reference only.

Press the CANCEL

Button to move to the next Program Option.

“SIM APN”

is displayed. Press the HELP Button.

The Medi-Link unit

displays the SIM APN eg “Telstra.intern” & cannot be changed
but are there for your reference only.

Press the CANCEL Button to

move to the next Program Option.

“Poll Time”

is displayed. Press the HELP Button.

The Medi-Link

unit displays the Poll Time eg “60” as the Default.

Press the HELP

Button to change from

“0” to “255” Minutes

. Press the CANCEL

Button to the next Program Option.

Mode (default = 5)

NB: Do not adjust, refer to SmartLink if required.

In Level (default = 0)

NB: Do not adjust, refer to SmartLink if required.

In Attenuate (default = 255)

NB: Do not adjust, refer to SmartLink if required.

Out Level (default = 2)

NB: Do not adjust, refer to SmartLink if required.

Out Attenuate (default = 127)

NB: Do not adjust, refer to SmartLink if required.

ADEMCO

1.4

10. CELLULAR

10. CELLULAR
↑↓ OutAttenuatio

10. CELLULAR
↑↓ Out Level

10. CELLULAR
↑↓ In Attenuation

10. CELLULAR
↑↓ In Level

10. CELLULAR
↑↓ Mode

10. CELLULAR
↑↓ Poll Time

10. CELLULAR
↑↓ Revision

10. CELLULAR
↑↓ Identity

10. CELLULAR
↑↓ SIM Identity

10. CELLULAR
↑↓ SIM Provider

10. CELLULAR
↑↓ SIM APN

10. CELLULAR
↑↓ Type

Summary of Contents for Medi-Link 100-824


















Search results

Summary of Contents for Medi-Link 100-824

Reviews:

Related manuals for Medi-Link 100-824

Brands by name

Popular brands

Smartlink Medi-Link 100-824, Installation Manual

Search results

Summary of Contents for Medi-Link 100-824

Reviews:

Related manuals for Medi-Link 100-824

Brands by name

Popular brands