build it!
Before you begin testing the limits of your Robo-6,
you’ll have to put it together. Here’s how.
equipment needed for robo-6 tests
• An assembled Robo-6
• Sidewalk chalk
• Books (to make stairs)
• Tape measure
• Toy cars
• A stopwatch, or a watch that
counts seconds
• String: a 10 ft piece and a 2 ft piece
parts
Shell
top
Shell
bottom
with hitch
S-legS with
traction
padS
gearbox
axle
coverS
axle
SupportS
hubcapS
axles
4-Short
2-long
3
Put axle
supports
onto axles.
Axle supports
go on either
direction and
fit on both
size axles.
Insert gearbox wire plug into shell bottom.
Tip the gearbox into
the shell bottom so the
lights line up with the
holes in the shell bottom.
Snap the gearbox
into place.
2
4
No
Secure axles, as pictured—short
axles in the front and back;
long axles in the middle.
1
yes