Produktblad
®
The Swedish Powder Lance
®
SPECIFICATIONS
Type of fire extinguishers:
The Powder Lance can be connected to any powder extinguisher
with one of the most common threads M14x1,5, M16x1,5 and
G1/4”. The extinguier must not have an air valve positioned
directly below the threaded outlet.
Powder Lance
—
The Original:
Length (total incl. coupling nipple): 750 mm
Working length (penetrative part): 530 mm
Weight: 590 g
Distribution of extinguishing media using the Original nozzle:
Dispersion: Forward, fan-shaped spread upwards and smaller
beams up and back to cover the area close to the operator.
Designed to optimally cover a large room of 7x5 m (35 sqm).
Throw length: 10-12 m in windproof conditions.
Emptying time: 20-25 s (with Presto 12 kg extinguisher).
Powder Lance
—
Long Lance
Length (total incl. coupling nipple): 1550 mm
Working length (penetrative part): 1330 mm
Weight: 760 g
Distribution of extinguishing media using the wide-beam nozzle:
Dispersion: Two main beams goes sideways with good thrust in
75 ° angle (90 ° is perpendicular to the direction of the lance). One
smaller beam goes stright forward and four beams goes around
like a restriction pattern at 90 ° angle. Throw length sideways: 6-8
m in each direction, gives a total range of 12-16 m. Designed to
reach both end gables on an attic by attacking through the
ceiling. Emptying time: 20-25 s (with Presto 12 kg extinguisher).
Note! The results may vary slightly and depend on the condition
of the extinguisher, with 15 bars pressure and no powder jam.
Hose:
Length1800 mm
Weight 620 g
Max Blast Pressure Hose 55 bar (at 20 °c)
Quick couplings
Maximum pressure 20 bar (at 20 °c)
EU Declaration of Conformity:
The powder Lance does not fall under any EU directive.
Self-designed product tests have been performed.
DECONTAMINATION OF POWDERS
A topic of discussion of all time. Better or worse? It spreads widely
and into everything and in contact with water powder is corro-
sive. It can cause serious damage to electrical equipment. But in
comparison to the damage caused by fire or water, powder is
usually way better- when used in the fire compartment, of course.
Dry powder is possible to clean up with vacuum cleaner and
washed or wet-dried with warm water and soap.
INTELLECTUAL PROPERTY RIGHTS
is a registrated trade mark.The design is protected no.
003377118, the whole shape of the product and specially the
original nozzle and the hand guard with the arrow.
CONTAKT INFORMATION
Smartish AB
Org. nr. 559154-2542
Address:
Falköpingsvägen 31
SE-56533 Mullsjö, Sweden.
E-mail: [email protected]
Responsible for technical testing and documentation
Product designer, CEO and Founder
Daniel Abrahamsson, Smartish AB.
Follow The Swedish Powder Lance
Hemsida: www.pulverlansen.se
facebook: https://www.facebook.com/DesignbySmartish/
Instagram:
https://www.instagram.com/theswedishpowderlance/
Please feel free to use the QR-codes below for quick access.
Art of smart products
User manual
