Step 8
If you choose to use the camera hole, the Official Raspberry Pi camera can be assemble into the
the camera hole with two of the small black screws. If you are not using the camera, proceed to Step 9.
Do not overtighten the screws!
To rotate the camera image 180 degrees
In a command line enter
sudo nano /etc/rc.local
Then go down and enter the following code above exit 0
v4l2-ctl --set-ctrl=rotate=180
Then enter CTRL+O to write out the file , then
press Enter to confirm and then CTRL-X to exit.
Once rebooted that should have the camera rotated
the correct way for most applications.
