Step 7
If you want to use HAT boards you have two options.
Option 1 - Stack the HAT directly on top of the Pi and purchase longer female to female jumper
wires ( not included ) to attach the display to the GPIO pins on the HAT. You will need to make sure
the HAT is not using the same GPIO pins as the display. Most HATS allow you pass through the
pins so they are accessible on the top.
Option 2 - Attach the HAT to the other mounting area with three threaded standoff risers (not included)
to avoid the GPIO jumper cables on the display. You would then need to use jumper cables to
attach the HAT to the Pi GPIO pins it requires to function.
