HAT160 ATS CONTROLLER USER MANUAL
HAT160 ATS Controller 2020-03-14 Version 1.1 Page 7 of 21
4. PANEL DESCRIPTION
4.1 FRONT PANEL
Fig. 1 Controller Front Panel
4.2 KEY FUNCTION DESCRIPTION
Table 4 Button Description
Icon
Function
Description
Auto/Manual
(Setting)
Auto/Manual mode switch;
Enter into lamp test status by pressing for 3s;
Enter into parameter configuration mode by pressing for 5s.
1# Close
1# Close in Manual mode;
Adjust parameters in parameter configuration mode.
Open
Open in Manual mode;
Adjust parameters in parameter configuration mode;
Clear alarm status (close/open failure, auxiliary input alarm) if alarms
occur in Manual or Auto mode;
2# Close
(Confirm)
2# Close in Manual mode;
Confirm parameter value in parameter configuration mode.
