CMM366A-4G Cloud Monitoring Communication Module User Manual
CMM366-4G Cloud Monitoring Communication Module 2017-12-25 Version 1.0 Page 11 of 16
5 PROGRAMMABLE PARAMETERS
5.1
CONTENTS AND SCOPES OF PARAMETERS
Table 5
– Parameter Content & Scope
No.
Items
Parameters
Defaults
Description
Gateway
1
Site Name
(0-65535)
20 Chinese characters, letters or
numbers
2
URL
(0-65535)
40 characters
3
Server Port
(0-65535)
91
4
Security Code
(0-65535)
123456
16 characters
GPS
1
GPS Enabled
(0-1)
1
0: Manual Input 1: GPS Location
2
Longitude
((-180)-180)°
0.000000
GPS location, altitude information
3
Latitude
((-90)-90)°
0.000000
4
Altitude
((-9999.9)-9999.9)m 100.0
GSM
1
GSM Enabled
(0-1)
1
0:Disabled; 1:Enabled
2
GPRS Password
Reserved
3
Message Center
Reserved
4
PIN Enabled
(0-1)
0
0:Disabled; 1:Enabled
5
APN
(0-65535)
40
characters
Digital Input
Digital Input 1
1
Setting
(0-9)
0
Default: Not used
2
Type
(0-1)
0
0:Active when close
1:Active when open
See:
Table 6
– Digital Input Ports
Content
3
Delay
(0-20.0)
0.0
Action delay
Digital Input 2
1
Setting
(0-9)
1
Default: Lamp test
2
Type
(0-1)
0
0:Active when close
1:Active when open
See:
Table 6
– Digital Input Ports
Content
3
Delay
(0-20.0)
0.0
Action delay
Digital Output
1
Setting
(0-14)
0
Default: Not used
Table 7
– Relay Output Ports
Content
NOTE: Configuration of monitoring genset controller model, communication port, communication
baud rate, and communication ID need to be set on the (
) platform, and
monitoring module need to restart up after all parameters been set.
