WATCH INSTALLATION VIDEO
smarterreefs.com/skimmerInstructions
Make sure you have all required parts:
● Skimmer Body
● Skimmer Pump
○ Electrical cord
○ Power supply
○ DC Controller
○ Pump Body
● Clean Material (Free spinning) Spindle
● Dirty Material (Motor) Spindle
● Set of screws (X x M6)
● Clean Filter Material Roll
● Venturi Connector
● Airline Tubing
● Air intake silencer / muffler
● Air silencer mounting bracket
Instructions
1. Remove and unwrap all parts from the package
2. Remove and unwrap all items that were shipped inside the skimmer body
3. Setup the skimmer pump
a. Insert the bubble diffuser over the skimmer pump outlet
b. Screw on the skimmer pump outlet cap to secure the bubble diffuser
c. Using long nylon screw, secure the bubble diffuser top to the bubble diffuser base
d. Grasp the end of the skimmer pump electrical cord and feed it down to the
bottom of the skimmer body, and feed it through the large hole at the base of the
skimmer body.
