Longo programmable controller LPC-2.WT1
5.4 Mounting instructions
Figure 4: Housing dimension
Dimensions in milimeters.
All connections, panel attachments and assembling must be done
while panel is not powered.
Panel should be positioned in the wall inside of the room. Avoid direct
sunlight or positioning near heating/cooling source object.
Panel is designed to be installed or placed vertically allowing air flow
from bottom to top.
1. Set the correct subnet (S1 switch) and wireless panel address (S2 switch) inside LPC-2.WT1
(refer to the Table 4 and Table 5),
2. Mount the back plate in mounting frames (dose),
3. Insert 2 AA 1.5V battery,
4. Attach front part of LPC-2.WT1 to the mounted back plate.
11