Longo programmable controller LPC-2.ID1
NOTE:
LPC-2.MC3 main control module should be powered separately from other electrical appliance
connected to LPC-2 system. Signal wires must be installed separately from power and high voltage
wires in accordance with general industry electrical installation standard.
Several RFID panels should not be mounted close to each other. Minimum distance to next panel is
at least 30 cm. This restrict also applies in case of mounting panels on both sides of the same wall.
Adequate shielding material and provisions should be used to avoid interference between panels.
Signal wires must be installed separately from power and high voltage wires in accordance
with general industry electrical installation standard.
6
