Additional equipment LOC-1
4.2 Mounting instructions
Figure 7: Housing dimensions
Dimensions in milimeters.
All connections, module attachments and assembling must be done
while module is not connected to the main power supply.
Mounting instructions:
The occupancy sensor should be located on the position that provides maximum effect.
1. Mount LOC-1 sensor on the position with the magnets or screws
. Magnets can be pushed to
the other side of abutment surface if needed.
2. Connect wires to input module according to Figure 2, 3 or 4.
5
See figure 9.
6
Screws are not supplied with sensor.
7
