Introduction
21
"Cancel" and quit setting. If the checkbox is checked, click "Detail setting." A
proxy setup screen will appear.
6) Enter the IP addresses of the network cameras in the field marked "Do not use
the proxy server with addresses started with the following.
7) Click "OK”, when Windows XP SP2 is used: Click "Install" for "Active-X control."
NOTE
●
A proxy server protected by a firewall sometimes cannot be connected to the
network camera. Consult the network administrator so as to avoid impacts on
network camera operations.
●
Communication with the network cameras via a proxy server may cause some
problem. Install the network cameras after consulting the network administrator.
●
Using the network cameras via a proxy server sometimes takes a long time till
images are displayed after log-in or reduces the frame rate of delivered images.
Camera Image Screen
When using Windows XP SP2
If fails to display the Camera Image screen, operate as follows.
1) Choose "Pop-up Blocker" on the tool menu.
2) Choose "Always Allow Pop-ups from This Site...",
