Introduction
3
camera due to lightning and power-line surges. If lightning occurs, do not touch
the unit or any connected cables in order to avoid electric shock.
14. Overloading
Do not overload power supply and extension cords as this can result in a risk of
fire or electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or
electrical shock. Never spill liquid of any kind on the camera.
16. Servicing
Do not attempt to service this camera yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
17. Damage Requiring Service
Disconnect this camera from the power supply and refer servicing to qualified
service personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the camera.
c. If the camera has been exposed to rain or water.
d. If the camera does not operate normally by following the operating
instructions in the instruction manual. Adjust only those controls that are
covered by the instruction manual as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified
technician to restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f. When the camera exhibits a distinct change in performance-this indicates a
need for service.
18. Replacement Parts
When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer with the same characteristics
as the original part. Unauthorized substitutions may result in fire, electric shock
or other hazards.
19. Safety Check
Upon completion of any service or repairs to this camera, ask the service
technician to perform safety checks to determine that the camera is in proper
operating condition.
The CAUTION label, shown on the above part, is attached on the camera.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
