Tools Required
• Screw gun
• 4mm hexagon bit for Confirmats (provided)
• 4mm ball head hexagon bit for Lamello Cabineo
surface connectors (provided)
Pre-Assembly:
Use a furniture blanket to prepare a safe workspace
for finished surfaces.
Install Lamello Cabineo Surface Connectors
The milled locations are easy to identify. Simply tap
the surface connectors into these locations with a
hammer. Avoid full power pounding!!
The tip of the screw ships “proud” which enables
easy assembly.
The diagram shows how the surface connector
works. The 4mm ball end hexagon bit is used with a
screw gun to make the surface connection. The ball
end is used because the access to the screw head is
at an angle.
Note: The 4mm ball head hexagon bit for Lamello
Cabineo surface connectors can be turned around
to make a straight 4mm hexagon bit for Confirmats.
This is recommended to extend the tool life of the
ball end.
Install Levelers | Floor
Glides | Locking Casters
Place black metal trim
parts in position over
the hole and install the
threaded insert using the
6mm hex key (provided).
DO NOT USE A SCREW
GUN.
Install the threaded floor
glides or locking casters
into the inserts.
2
Technical Support: 800-770- 7042 | www.smartdesks.com
Universal SMARTdesk Assembly
