Insert cam pins half way
into end panel pin holes
This will make assembly go smoothly.
The next step is to place the modesty panel into
place so the pins can be pushed into place.
If you are assembling the single, without a brace,
this can be managed pretty easily.
©2008 CBT Supply, Inc,
Tech Support Line: 800-770-7042
www.smartdesks.com
page 5
For the double and triple, it is easier to start this process by pinning the
modesty panel to the brace first. Then the end panels can be easily
pinned.
Use a Phillips #2 screw driver to turn the cam 90° clockwise. to lock the
cam. The arrow should be pointed away from the joint to lock.
The arrow on the cam points away from the pin,
as shown, to lock. The arrow should point the
other way to insert.
