SmartCam A12VT, Quick Start Manual, Page: 14 / 48

8
button 1 to control the camera with address 1.
3 Focus
Press “AUTO” button to switch to Auto
Focus, press “MANU” button to switch to
Manual Focus mode.
“ ”button to Focus Near
“ ”button to Focus Far
“
”button to Auto Focus once every time
it is pressed, then switch back to Manual
Focus mode.
4 Iris
Press“ ”button to reset iris value to
default. “ ”button to Iris Open
“ ”button to Iris Close.
5 Menu
Press MENU button to enter / exit menu.
6 Data
The button is reserved for future use.
7 Number Keys
Used to input numbers, for example, preset
number.
8 Cancel
The button is reserved for future use.
9 Power
After the camera has been connected to
power source, in none-menu status, press
this button to turn on / off the camera.
10 Reserved buttons （ F1 , F2 , F3 , F4 ）
Press the "F1" button, start the trace, press
the "F2" button, stop tracking, press the
"F3" button, SDI/HDMI output scene switch,
"F4" button for the retention button, no
function.
11 Pattern
The button is reserved for future use.
12 BLC
Used to open / close back light
compensation.
13 Zoom
Used to adjust zooming times.
“ ”button to zoom in
“ ”button to zoom out.
14 Back
Press “ ” button to go back to previous
menu.
15 OK
In None-menu status: press this button
to switch among pan / tilt control speeds.
In Menu status: get into relative
menu option after it has been
selected.
16 Direction / Menu Operation
In None-menu status, press these four
buttons to pan left/right and tilt up/
down.