Smartbox Power Pad, User Manual, Page: 53 / 84

52
Plug your EasyWave socket into a mains socket and press the button
once to enter training mode. The LED will flash in a steady pattern.
In Grid 3 highlight your newly named button and tap on Transmit A.
On your EasyWave socket, press the button three times. This will return
the device to operating mode. Now you can tap Transmit A to toggle
the socket to on, and Transmit B to toggle it off.
Adding the paired socket to an accessory
Once your socket has been paired, you can assign it to an accessory
to use it in the Servus Environment Control grid sets. In
Settings –
Environment control , under the Accessories heading, tap Add . From
the Add accessory window select Socket and tap Next .
You can now give the accessory a name. This is useful if you are using
more than one at the same time. In this example, the socket is being
used to control a desk fan.