12
3. Configuration
3.3.2 Launching the Web Configuration
Using an Internet browser
To launch the Web Configuration utility using an Internet web browser:
1. Open a web browser.
2. Disable your proxy settings, if any.
3. Type http://192.168.1.1 on the address bar of the browser, and then press <Enter>.
4. Log on to the configuration window using the user name (admin) and password (admin),
then click OK.
This option requires you to change the IP address of the LAN adapter where the SAG-
1010 is connected. Make sure the IP address of the SAG-1010 and your computer is on
the same subnet.
3.3.3 Changing the Access Point (AP) Configuration
Simple Setup Page
The Simple Setup page displays the default AP settings of the SAG-1010.
Use this page to set the AP channel, operation mode, and security.
Clicking the select button displays available options for that field. If you wish to load the default
settings, press the device reset button for more than five seconds, and then refresh your browser
to display the default values.
SSID (Service Set Identifier). This field displays the SSID of the device.
Enabling the Response to Broadcast SSID requests option allows the device to broadcast its
SSID in a wireless network. This allows other wireless devices to scan and establish
communication with the device.
Un-checking this option hides the SSID to prevent other wireless devices from recognizing and
connecting to the device.
