SmartAnt
7
1.3.3 Rear view
Ethernet port.
This port connects the
supplied RJ-45 plug and cable.
Power socket.
This socket connects
the power adapter plug.
Reset button.
Press this button for
more than five seconds to load the default values. In Ethernet adapter mode,
press this button for less than five seconds to connect to the first saved wireless
connection in the profile table.
Ethernet port
DC IN socket
Reset button
1. Product introduction
1.4 LED indicators
The SmartAnt SAA04-05224A comes with a Ethernet, Wireless, and
Power LED indicators. Refer to the table below for LED indications.
LED
Status
Indication
Ethernet
On
The device is connected to an Ethernet network.
Off
The device is off or not connected to an Ethernet network.
Wireless On
The device is associated with an AP or other wireless device.
Off
The device is not associated with an AP or other wireless device.
Blinking
The device is transmitting or receiving data.
Power
On
The device is on and ready.
Off
The device is off or performing boot sequence.
Blinking
Firmware upgrade failed.
