10
SmartAnt
2. Hardware installation
2.1 System requirements
Before installing the SmartAnt SAA04-05224A, make sure that your
system/network meets the following requirements:
•
An Ethernet RJ-45 port (10Base-T/100Base-TX)
•
At least one IEEE 802.11b/g device with wireless capability
•
An installed TCP/IP and Internet browser
2.2 Device installation
Follow these instructions to install the SmartAnt SAA04-05224A.
1. Install the device utilities from the support CD.
2. Connect the device to your computer, network hub, switch, or router.
2.2.1 Before you proceed
Take note of the following guidelines before installing the SmartAnt SAA04-
05224A.
•
The length of the Ethernet cable that connects the device to the network
(hub, ADSL/cable modem, router, wall patch) must not exceed 100
meters.
•
Place the device on a flat, stable surface as far from the ground as
possible
•
Keep the device clear from metal obstructions and away from direct
sunlight.
•
Keep the device away from transformers, heavy-duty motors, fluorescent
lights, microwave ovens, refrigerators, and other industrial equipment
to prevent signal loss.
•
Install the device in a central area to provide ideal coverage for all
wireless mobile devices.
•
Install the device at least 20cm from a person to insure that the product
is operated in accordance with the RF Guidelines for Human Exposure
adopted by the Federal Communications Commission.
