Make sure that the mirror isn’t angled too far left or right.
Focusing and Aligning the Image
To focus and align the image, project either a computer image, or the projector’s SMART Technologies logo onto
your SMART Board interactive whiteboard. For more information about connecting a computer to the interactive
whiteboard and Unifi 45 projector, refer to the
SMART Board 600i2 Interactive Whiteboard System Configuration
.
To display the SMART Technologies logo
If you don’t have a computer connected and you don’t see the SMART
Technologies logo, perform the following steps to display the logo.
1. Point the remote control at the infrared (IR) sensor on the front of the
projector, as shown, and then press the
MENU
button.
2. Press the left and right buttons on the remote to select
Display
Settings
(third menu from the left).
3. Press the up and down buttons to access the
Background
settings.
4. Press the right button to display the
Background
options.
5. Press the up and down buttons to select
Logo
.
The SMART logo displays on the screen.
To focus the image
Use the focus adjustment lever to focus the image.
Angle Too Far Left
Angle Too Far Right
IR Sensor
Focus Lever
