15
Cleaning and Maintenance of the washing machine
If the drain filter is not cleaned at proper time (every 10 times of use),Drain problem could be caused.
Notes:
Clean the lint filter in the drain pump (only for having drain filter)
1. Drain the water out of the
pump,under which use a
container to collect.
2. Loosen the pump cover
anticlockwise.
3. Take out the lint filter.
4. Clean the filter.
5. Restore it and adjust the
convex place to align at
the pump hole.
6. Tighten the pump cover
clockwise.
End of program
The washing machine will send off the sound
of dou-dou at the end of any program operation
to remind you to take out the laundry or operate
it again.
After the sound ,the washing machine returns
to its power-off state with no display and all lights off.
Please shut off the tap, pull out the plug when not
in use to avoid water leakage or the fire accidents.
"
"
Maintenance
Use gentle clothing to wipe off the water and dirt on
the surface each time after using the washing machine.
Detergent , propellant and
other chemicals are not
allowed to use so as to avoid
any damage to the plastic
accessories.
Clean the water inlet
Clean Of the filter
After
long
time
use
,
the
water
inlet
mesh
bag
may
be
blocked
with
smudginess
,
and
should
be
cleaned
according
to
the
following
steps
:
1
.
Switch
on
the
power
,
followed
by
shutting
off
the
tap
.
2
.
Let
the
washer
works
for
5
seconds
so
that
water
flows
into
the
tub
through
the
water
inlet
hose
.
then
turn
off
the
power
.
3
.
Unload
the
water
inlet
hose
and
clean
the
mesh
bag
,
then
restore
the
water
inlet
assembly
.
After
using
the
washing
machine
for
a
period
,
please
clean
it
according
to
the
following
steps
:
1
.
Take
out
the
lint
filter
.
2
.
Open the filter
and
wash
it
clean
in
the water
.
3
.
Restore
it
and
fix
it
.
After using the washing machine for a period, clean it
according to the following steps:
1. Take off the lint filter.
2. Turn over the mesh bag and wash it clean in the water.
3. Restore and fix it.
(only for magic filter)
(only for normal filter)
16
No
washing
Abnormal
draining
Abnormal
spin
Identify usual trouble of washer
List of faults and inspection
Faults
Inspection Items
No water
flows in
If the power is off or the fuse is burned out.
If the water supply is cut off or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the filtering screen of inlet valve is blocked by dirt.
If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
If the "Start / Pause" button is pressed after the power
switch is pressed.
If the door lid is closed.
If all clothing piled largely at one side of barrel or the clothing
is excessively placed.
If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
If the motor belt is loosened.
Note:
During the de spin process, if washing are piled at one side of the spin barrel, it will cause
unbalance of spin barrel resulting in striking. At this moment, the computer inside the washer
will feel this unbalance phenomenon and will automatically correct it ( fill in water Washing ).
However, if unbalance situation is not removed after continuous three corrections, which means
the computer auto-correction can not resolve the problem. Then the user has to manually and
evenly place the clothing inside the barrel to solve the problem.
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine without
permission.
If the washer can not work normally, or appear abnormity or alarms, please check and
correct as follows.
If the water drain hose is placed very high.
If the end of water drain hose is sealed in pond.
If the internal rubber ring of drain valve is blocked by dirt.
If the power is off or the fuse is burned out.
If the power supply voltage is too low.
If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
If it is set to "Delay" washing mode. (It will only start to work
until the reservation time reached)
