SMART SBID-7286, Installation And Maintenance Manual, Page: 5 / 78

IMPORTANT INFORMATION
iii smarttech.com/kb/171164
l
You must connect the USB cable that came with the display to a computer that has a USB
compliant interface and that bears the USB logo. In addition, the USB source computer must
be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or UL Mark(s) for
CSA/UL 60950. This is for operating safety and to avoid damage to the display.
l
Wait five minutes before removing the iQ appliance (AM50) from the display to allow the iQ
appliance (AM50) to cool.
IMPORTANT
l
The following are the normal operating power requirements for the display:
Model Power requirements
SBID-7075 100V to 240V AC, 50 Hz to 60 Hz, 147 W
SBID-7086 100V to 240V AC, 50 Hz to 60 Hz, 172 W
SBID-7275 100V to 240V AC, 50 Hz to 60 Hz, 162 W
SBID-7286 100V to 240V AC, 50 Hz to 60 Hz, 187 W
SBID-7375 100V to 240V AC, 50 Hz to 60 Hz, 162 W
SBID-7386 100V to 240V AC, 50 Hz to 60 Hz, 187 W
SBID-7075P 100V to 240V AC, 50 Hz to 60 Hz, 147 W
SBID-7086P 100V to 240V AC, 50 Hz to 60 Hz, 172 W
SBID-7275P 100V to 240V AC, 50 Hz to 60 Hz, 162 W
SBID-7286P 100V to 240V AC, 50 Hz to 60 Hz, 187 W
SBID-7375P 100V to 240V AC, 50 Hz to 60 Hz, 162 W
SBID-7386P 100V to 240V AC, 50 Hz to 60 Hz, 187 W
l
For additional requirements and other information, refer to the display’s specifications (see
More information on page 8).
Federal Communication Commission
interference statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.