SMART radio 9, Operating Instructions Manual, Page: 19 / 28

Information regarding WMA files
R
To display the title, artist and album
name, you need to add the
corresponding metadata to the WMA
file before burning.
R
The file extension for WMA files must
be "wma" and must be separated from
the file name by a period. If any other
file extension is used, this will not be
recognized by the equipment.
i
A number of factors influence whether
or not a WMA file can be played,
including:
R
Sampling rate
R
Bit rate
R
Encoding process
R
Software used for the creation of the
WMA files
R
Burn software
R
Other settings (e.g. copy protection,
Digital Rights Management, advanced
audio format settings).
To create WMA files, use only current
standard software, a sampling rate of
44.1 kHz and bit rates between 160 and
320 kbit/s. Do not use other settings such
as lossless coding, surround sound, DRM,
copy protection etc.
Do not use compilations that contain WMA
files with other settings as this may
render the CD unplayable even if only
some files on the CD do not fulfil the
required standards.
Playing back CDs
In radio or AUX mode:
X Press the SRC button repeatedly until the
CD menu appears.
The radio switches to CD mode. The
inserted CD is played.
Display with audio CD inserted
Display with MP3/WMA CD inserted
If no CD is inserted in the CD drive, the
display shows the
NO CD
message.
The radio returns to the previously active
function after approximately 2 seconds.
or
X Insert a CD into the CD slot.
The radio switches to CD mode. The
inserted CD is played.
i
The radio displays both MP3 and WMA
data in the same way. The display will
show
MP3
for both formats.
Ejecting a CD
X Press the EJECT button.
X The CD is ejected.
X Remove the CD from the slot.
If the CD is not removed from the slot
within approximately ten seconds, the
radio will draw it in again. If there is
no longer a CD in the slot, the radio
>> Audio.
17
audio_ZA; 1; 6, de-DE
sabbaeu,
Version: 2.11.4
2008-11-10T16:22:06+01:00 - Seite 17
Z