SMART radio 9, Operating Instructions Manual, Page: 16 / 28

X
Set the desired waveband.
X
To start the station scan: press the
SCAN button.
The station scan starts.
R
The station scan plays every station
identified for approximately eight
seconds and stops once it has reached
the station set before the scan was
started.
R
If the end of the waveband is reached,
the scan continues at the beginning of
the waveband.
X To stop the station scan: press the SCAN
button.
If you stop the station scan before it has
found a new station, the radio sets the
last station identified.
Tuning in Stations Manually
You can tune in manually in all wavebands.
X
Set the desired waveband.
X
Press and hold the
ý
or
þ
arrow
button.
Manual tuning is selected and the
frequency changes in the desired
direction.
X
Release the button when the desired
frequency has been reached.
X Fine tuning by increments: press the
ý
or
þ
arrow button briefly
several times.
Tuning in a Station via the Station Pre-
Sets
X Select the desired pre-set group (FM 1,
FM 2, AM 1 or AM 2).
X Press one of the number keys 1 – 6.
The radio tunes in to the station stored
under the selected pre-set.
Storing a Station
Each pre-set group (FM 1, FM 2, AM 1, AM 2)
provides six pre-sets.
The following options allow you to store a
station:
R
manually, using the number keys (all pre-
set groups)
R
automatically, using the Autostore
function (
FM 2
and
AM 2
only)
Storing Stations Manually Using the
Number Pad
X
Select the desired pre-set group
FM 1
,
FM 2
,
AM 1
or
AM 2
.
X Selecting a station
X Press and hold the desired number key,
e.g. 4, until you hear a tone.
The currently set station is stored under
pre-set 4 in the pre-set group selected.
Storing stations using the Autostore
function
i
The Autostore function automatically
assigns receivable stations to the pre-
sets in the pre-set groups FM 2 and AM 2
in an order corresponding to the quality
of reception. Any channels stored
manually in these pre-sets will be lost.
X To autostore FM stations: select the pre-
set group
FM 2
.
X Press and hold the FM button.
X
To autostore AM stations: select the pre-
set group
AM 2
.
X
Press and hold the AM button.
X The Autostore function scans the
waveband and stores the stations found in
the pre-set group selected.
14
>> Audio.
audio_ZA; 1; 6, de-DE
sabbaeu,
Version: 2.11.4
2008-11-10T16:22:06+01:00 - Seite 14