CONTENT IN THE BOX
1. Production Line Tester Unit
2. (As per order)Test lead set for “PLT TEST” containing;
2 wires of 95 sq.mm 1 mtr length with copper probes on one end
and lugs on other end.
2.5 sq.mm 1 mtr length Red wire with lugs attached on both ends.
2.5 sq.mm 1 mtr length Black wire with lugs attached on both ends.
3. (As per order)Test lead set for “HRD TEST” containing;
2 wires of 95 sq.mm 1 mtr length with lugs attached on both end.
2.5 sq.mm 1 mtr length Red wire with lug attached on one end
and red clip attached on other end.
2.5 sq.mm 1 mtr length Black wire with lug attached on one end
and Black clip attached on other end.
4. Foot switch assembly
5. Mains cord cable 2 mtrs length
6. Trolley assembly (optional)
8. User Manual
7. Nut & bolt hardware required for test lead connection
SETTING
MIN
MAX
TEST CURRENT (AMPERES)
CUTOFF VOLTAGE (VOLTS)
10
600
8.00
12.00
RESOLUTION
0
10
TEST TIMER (SECONDS)
ONLY FOR PLT
1 AMPERE
0.1 VOLT
1 SECONDS
TEST PARAMETERS AND RANGE
Dimension
Weight
SPECIFICATIONS
Input Supply
Input current
Fuse Type
:
:
:
:
:
790 mm(W) x 490 mm(H) x 380 mm (D)
35 K.G. Approx.
200 - 260VAC 50Hz
1 Amp Approx.
5 Amp / SLOW BLOW
