1.
- This is a switch to turn “ON” or “OFF” the machine supply.
ON/OFF SWITCH
2.
- This is a toggle switch for selection betwwen “PLT” or “HRD”
PLT/HRD SWITCH
test selection.
3.
- This is a toggle switch for selection between “setting mode”
SET/RUN SWITCH
or “run mode”.
4.
- It is a LED indication for showing Test Result.
RESULT LED
“Green LED” means test result is “Pass” and the battery is GOOD,
“Red LED” means test result is “Fail” and the battery is BAD.
5.
- During RUN mode It shows 3 Digit value of Test Current.
CURRENT DISPLAY
6.
- During RUN mode it shows 4 Digit value of battery voltage.
VOLTAGE DISPLAY
During SET mode it shows the 4 Digit value for Cutoff Voltage.
7.
- During RUN mode for PLT TEST it is a Down Timer in Seconds.
TIMER DISPLAY
During RUN mode for HRD TEST it is a UP Timer from zero.
8.
- This is a LED indication for Timer (only during HRD TEST mode).
HH:MM LED
LED is “ON”, it means timer is showing time in Hours and Minutes.
LED is “OFF”, it means timer is showing time in Minutes and Seconds.
9.
- This is a push button type keypad having 3 keys.
KEYPAD
1. UP key 2. DOWN key 3. ENTER/START key
10.
- This is a pickup wire connection for voltage measurement
VOLTAGE VE
from +VE battery terminal.
11.
- Aluminium terminal for connecting heavy load wire pickup
CURRENT VE
from +VE battery terminal.
12.
- This is a pickup wire connection for voltage measurement
VOLTAGE PICKUP -VE
from -VE battery terminal.
13.
- Aluminium terminal for connecting heavy load wire pickup
CURRENT PICKUP -VE
from -VE battery terminal.
14.
- Front mounted fans for forced air cooling of machine.
COOLING FAN
