SMART LightRaise Installation and User's Guide
9
Fasteners
Different types of fasteners are used in the installation of the SMART LightRaise projector
mount. Refer to the following chart to match the screw with its name.
NOTE:
The illustrations are representative and aren't to scale.
Fastener
Name
Usage
#10-32 x
5
/
16
" UNF
Phillips pan head
screws
•
with a lock washer to hold boom
pivot in place
•
holds strut end to lower boom
bracket
(side view)
lock washer
•
with #10-32 x
5
/
16
" UNF Phillips
pan head screws to hold boom
pivot in place
#8 x 1¼" AB truss
head screws
•
at all drywall anchor keyhole
locations
¼-20 UNC x 1½"
Phillips pan head
bolts
•
with the toggle anchors for the
console bracket
•
holds brackets to walls with
metal studs
#8 x 2½" Phillips
round head wood
screws
•
with #8 washer used to install
brackets into wooden studs
#8 burr washer
•
with wood screws used to install
boom wall brackets and console
bracket into wooden studs
TORX®
M4 x
25 mm button head
tamper-resistant
fasteners
•
with inside star washer, holds the
projector mount to the boom
inside star washer
•
with TORX fasteners, holds the
projector mount to the boom
¼ x 1¾" concrete
anchor screw
•
holds brackets onto concrete or
cinder block wall
¼-20 x ½" security
hex socket button
head cap screw
•
holds console to console bracket
tie wrap mount
•
with a TORX fastener, holds the
boom cables together before
they reach the projector