Extended Settings and Functions
26
6.7.2
OSD Timeout
In the sub-menu
OSD Setting
move the highlight on
OSD Timeout
and press the keys
V+ / V-
to
set the number of seconds after which the OSD should be hidden. You may set values from
1 to
10 seconds
. Default value is
4
s (factory setting).
6.7.3
OSD Transparency
In the sub-menu
OSD Setting
move the highlight on
OSD Transparency
and press the keys
V+ /
V-
to select among
Off
(0% - no transparency),
10%, 20%, 30%, 40%
(almost transparent). The
default option is
Off
.
6.8
LNB supply voltage
1. Select in the menu
System
Setup
the submenu
Other
and press
OK
.
2. Select
LNB Power
, to switch
on /off
the LNB supply voltage at
LNB IN
.
6.9
Channel Play Type
1. Select in the menu
System
Setup
the submenu
Other
and press
OK
.
2. Select
Channel Play Type
, to set whether all channels, only free-to-air channels or only encoded
channels will be displayed.
6.10 Channel Change
When switching between different channels, it often happens that a short pause occurs until the re-
ceiver shows the picture of the selected channel
1. Select in the menu
System
Setup
the submenu
Other
and press
OK
.
2. Select
Channel Change
, to set whether you want the picture to be frozen for a short instant or
prefer a black screen during this time.
6.11 Beeper
1. Select in the menu
System
Setup
the submenu
Other
and press
OK
.
2. Select
Beeper
, to set whether you want your TV set to play an acoustic signal while you're in the
"Antenna Settings" menu.
The acoustic signal sequence accelerates when the signal is better and slows down when the signal
is poorer.
6.12 Automatic Standby Function
Based on current EC regulations, this receiver is equipped with an energy sav-
ing system. After three hours, the receiver will automatically switch to energy
save mode (energy consumption of less than 1 W) unless a function is trig-
gered via remote control during such period (e.g. volume change or switching
of channels). You can deactivate the automatic standby function via the menu.
1. Select in the menu
System
Setup
the submenu
Other
and press
OK
.
2. Select
Auto Standby
to switch on or switch off the automatic standby function (factory setting is
Auto Standby
On
).
6.13 Zoom Function
Press green
ZOOM
key, to enlarge the image.
