Basic Operation
11
optional connection
4.1
Connecting Satellite Antenna
Connect the antenna cable to the receiver connection
LNB IN
.
4.2
Connecting the TV set
Connect the TV set to the receiver connection
TV
with a Scart cable.
4.3
Connecting the home cinema system
To improve audio playback, you can connect to your receiver - additionally to the TV set - also a
multichannel home cinema system or a hi-fi system (if your home cinema system can process digital
audio data SPDIF):
Connect the home cinema system to the receiver connection
DIGITAL AUDIO
with a suitable
cinch cable.
4.4
Inserting or Changing Batteries of the Remote Control
This describes the steps for inserting new batteries of the remote control or for replacing
empty batteries:
1. Open the battery compartment on the bottom side of the remote control. Remove the cover of the
battery compartment
.
2. Place the two batteries 1.5 V (type: AAA). Ensure correct polarity!
3. Close the battery compartment
Replace the batteries if certain remote control functions are not performed any
more or are performed incorrectly.
When replacing batteries, always ensure that all batteries are replaced.
5 Basic Operation
This chapter describes the required steps to be able to use the offer of radio and TV channels provid-
ed via satellite.
5.1
Switching on the Receiver
1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the signals from the receiver
are displayed).
3. Ensure that the correct audio input is selected at the connected home cinema or hi-fi system.
4. Connect the mains plug to the power outlet to switch on the receiver.