ENGLISH
7
11. Place Lid on unit and line up arrows on Lid and
Blending Chamber. This is a safety feature and
the unit will not turn on without the Lid in the
correct position.
12. You can add additional liquid at any time by
opening the Clear Window in the Lid. Add more
liquid after mixing to reach desired consistency.
13. Plug in unit and turn ON by flipping the switch downward to ON position.
14. Blend for approximately 10 minutes or until mixture has reached the desired consistency.
15. While the unit is still on, place glass underneath the Spout and dispense the beverage by
lifting the Spout handle up. It is recommended to place a towel or other cloth on the table
or countertop underneath the Spout to protect against any drips. NOTE: the Spout has a
locking upright position for filling multiple drink glasses or a pitcher of drinks.
16. If the Spout drips after dispensing, place a glass or container underneath Spout and open
and close the valve by pushing down on the Spout Handle once or twice quickly. Small ice
chips can sometimes get caught in the gasket, preventing it from closing completely.
17. Turn off the unit when desired consistency is achieved and it will keep your beverage cold
until ready to dispense again.
18. Always dispense beverage with the appliance turned ON. Allow the unit to run for 8 seconds
to mix before dispensing if unit has been sitting. When you have finished, turn side knob to
OFF position and unplug unit.
OFF
ON
HSB590_SMART_TRI_IM_v1.indd 7
06/06/2017 09:28