ENGLISH
5
PARTS & ASSEMBLY
Cord Location
The cord storage is located at the base of the unit:
Attaching and Removing the Grinding Cage
It is very important that the Grinding Cage is assembled properly in order for the unit to
work.
1.
The Grinding Cage is attached to the
inside of the Blending Chamber with a
round Plastic Collar.
2.
Place the Grinding Cage with the
smooth end (opposite of end with three
tabs) into the Plastic Collar and twist
until the notch of the Grinding Cage
locks into the protrusion on the Plastic
Collar.
3.
Turn the assembled Grinding Cage with Plastic Collar over, so Plastic Collar is on the top to
insert into the base of Blending Chamber.
Screws
Grinder
Plastic Collar
Base
Blending Chamber
Lid
Spout
Grinding Cage
Clear
Window
HSB590_SMART_TRI_IM_v1.indd 5
06/06/2017 09:28