SMART fortwo 2015, Owner'S Manual, Page: 128 / 228

cally (see the separate operating instruc-
tions).
X
To reset the data: press the
a
button on
the steering wheel.
X
Press the
9
or
:
button to select
yes
and press the
a
button to confirm.
The display shows the trip computer and the
data shown is reset.
The average speed and average fuel con-
sumption are only displayed again once a
distance of approx. 400 m has been covered.
The data in the
from start
trip computer
menu refers to the start of the journey. The
data in the
from reset
trip computer sub-
menu refers to the last time the submenu was
reset.
The
from start
trip computer is automati-
cally reset when:
R
the ignition has been switched off for more
than 4 hours.
R
999 hours have been exceeded.
R
9,999 kilometres have been exceeded.
The
from reset
trip computer is automati-
cally reset if the value exceeds 9,999 hours or
99,999 kilometres.
The unit of distance for the journey, speed
and consumption information can be changed
in the
Display
submenu ( Y page 129).
eco score from start menu
eco score display (vehicles with manual trans-
mission)
eco score display (vehicles with automatic
transmission)
X
To display: press the
9
or
:
button
on the steering wheel to select the
eco
score from start
menu.
If you reset the data in the eco score display,
then the data in the
from start
trip computer
is also reset automatically ( Y page 125).
X
To reset the data: press the
a
button on
the steering wheel.
X
Press the
9
or
:
button to select
yes
and press the
a
button to confirm.
The display shows the eco score display and
the data shown is reset.
The percentage count in the eco score dis-
play only reappears once a distance of
approx. 400 m has been covered.
If the ignition remains switched off for lon-
ger than 4 hours, the eco score display in the
on-board computer will be automatically
reset.
For further information on the eco score dis-
play, see (
Y page 109).
Fuel consumption menu
Example: fuel consumption
X
Press the
9
or
:
button on the steer-
ing wheel to select the display of current
fuel consumption.
The display shows the fuel consumption over
the previous 15 minutes as a bar chart. The
display additionally shows the current fuel
consumption as a numeric value in the upper
right section of the display.
When the vehicle is stationary or up to a speed
of approximately 5 km/h, the display shows
the current fuel consumption as a numeric
value in l/h. If you have changed the unit of
measurement for distance to
Miles
, the dis-
play shows two dashes.
If you switch off the ignition, or change the
distance unit, the fuel consumption data is
deleted automatically.
126
Menus and submenus
>> On-board computer and displays
.