Installation and Commissioning
28
smart Evolution II
3.3
Grounding
Before you put the smart Evolution II into operation, you must ground the headend correctly. Use the
grounding screw on the bottom (see diagram).
3.4
Connect Satellite Antenna
Connect the four outputs of a quatro LNB using the corresponding Evolution II inputs
INPUT HH, VH, HL,
and
VL
.
The built-in multi-switch of the Evolution II is Quad-Switch LNB (Quad LNB)-
compatible, this means you can connect the output of a quad-LNB switch to any in-
put
INPUT HH, VH, VL
and
HL
.
3.5
Connect to the House Distribution Network
Connect the output
OUTPUT HF
of the Evolution II with the house distribution network.
3.6
Connect the Control Monitor (Optional)
Connect the output
OUTPUT VIDEO
with the
FBAS input (Composite Video)
of a monitor (to show the
OSD
5
during programming).
3.7
Connect a Measuring Instrument (Optional)
Connect the output
OUTPUT HF
TEST
of the Evolution II with an appropriate measuring device to de-
termine whether the output signal is present and to show or evaluate it, if necessary.
3.8
Additional Input
The output
OUTPUT HF
TEST
can also be used as input for additional channels with frequencies from 5-
1000 MHz.
Connect, for example,
OUTPUT HF
TEST
to the output of a DVB-T antenna.
5
OSD = On Screen Display