READY indicator
READY
READY
appears for two seconds in the mul-
tifunction display, if:
R
the key is turned to starter switch posi-
tion 2
R
there is no malfunction in the drive sys-
tem
The vehicle is ready to drive.
Charging mode display
When you switch off the ignition, you see
the display of the charging mode which is
currently set.
The charging mode is not changed after the
ignition has been switched off.
i
If the multifunction display has
already gone out, you must turn the key to
starter switch position 1. Afterwards,
you can change the setting in the
Charge
Charge
and Depart
and Depart
menu (
Y
page 90).
If you do not make a change, the last
selected entry is activated. If you have not
made any departure time settings in the
last 24 hours, the
Instant Charge
Instant Charge
menu is
activated.
Example illustration: Departure time selected
:
Preset departure time
;
Instant Charge
Instant Charge
menu
X
To change the setting: press and hold the
control switch on the control lever up or
down until the desired mode is selected
in the multifunction display (
Y
page 83).
Additional information:
R
Setting the departure time (
Y
page 90)
R
Starting the charging process immedi-
ately (
Y
page 92)
Outside temperature
G
WARNING
The outside temperature display is not
designed as an ice-warning device and is
therefore unsuitable for that purpose.
Indicated temperatures just above the
freezing point do not guarantee that the
road surface is free of ice. The road may
still be icy, especially in wooded areas or
on bridges. Your vehicle could start to skid
if you do not adjust your driving style
accordingly.
Therefore, always adjust your driving style
to the prevailing road and weather condi-
tions.
Example illustration (U.S. vehicles)
i
Canada vehicles: The outside tempera-
ture display shows
°C
°C
instead of
°F
°F
.
The outside temperature display
:
appears in the multifunction display con-
tinuously.
A change of the outside temperature will be
displayed with delay.
Control system
87
>>
Contr
ols.
Z
