3
Important information
IMPORTANT SAFETY INSTRUCTIONS:
SAVE THESE INSTRUCTIONS
NOTE
Refer to the
illustrated installation instructions
for important
information about installing and setting up the stand.
WARNING
l
Read the following warnings carefully. Failure to read the
warnings below or to follow the installation instructions
included with the stand could result in personal injury or
product damage.
l
DANGER: to reduce the risk of shock, always unplug the
stand from the electrical outlet before cleaning or
servicing the stand.
l
Closely supervise the operation of the stand when it’s
used near children or people with disabilities.
l
Use the stand only for its intended use as described in
these instructions. Do not use attachments not
recommended by SMART Technologies.
l
Do not operate the stand if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water. Return the
stand to a service center for examination and repair.
l
Keep the power cord away from heated surfaces.
l
Do not drop or insert any object into any opening.
l
Do not use outdoors.
l
Connect the stand only to a properly grounded outlet.
l
Only use the stand with a nominal 120-volt circuit that has
a grounding plug that looks like the plug in the illustration
below.
l
Only connect the stand to an outlet that has the same
configuration as the plug.
l
Do not defeat the safety purpose of the grounding-type
plug. A grounding plug has two blades or pins and a third
grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into the outlet,
consult an electrician for replacement of the obsolete
outlet.
l
Do not alter or remove the grounding prong from the
power cord.
l
Improper use of the grounding plug can result in electric
shock.
l
Do not use a mains power adapter plug.
l
The stand must be grounded to reduce the risk of electric
shock in the event of an electrical short circuit.
l
To prevent injury, the stand must be securely attached to
the wall in accordance with the installation instructions.
l
The assembly and installation of the stand is intended for
a trained professional.
l
The installer must follow the installation instructions. Not
doing so can result in injury or damage to equipment.
l
Use only SMART-supplied mounting hardware or
hardware that is designed to properly support the weight
of the stand and mounted display and accessories.
l
Use the stand only for lifting a display that meets the size
and weight limitations indicated in the product
specifications. Do not use the stand to lift people or
objects.
l
Do not overload the stand with too much weight, as this
can cause injury or damage to the stand.
l
Operating the stand can create a hand-crushing or
hand-pinching hazard. To prevent injury, keep hands and
people away from crush and pinch locations on the
stand.
l
Allow adequate clearance above and below the stand to
ensure safe raising and lowering.
l
Do not operate the stand if it is damaged.
l
Do not use the stand near water.
l
Allow only adults who are trained and able to use the
stand safely to operate it.
l
Do not allow children or people who are not able to safely
operate the stand to use it.
l
Do not allow children to operate or play with the stand.
l
Do not climb (or allow children to climb) on a wall- or
stand-supported display. Climbing on the display could
result in injury or product damage.