Chapter 3
Using the stand
14
Resetting the stand
The stand needs to be reset before you start to use it.
To reset the stand
1. Connect the stand to a power outlet.
2. Press the
, , and
buttons in sequence, and then press down on the control switch for 5
seconds.
TIP
Don’t allow more than one second between button presses.
The stand moves up 1 cm and then back down.
Unlocking the height-adjustment safety lock
The stand’s height-adjustment mechanism locks automatically after 20 seconds of inactivity. Unlock the
height-adjustment lock before you raise or lower the stand.
To unlock the stand’s height adjustment
Press the
, , and
buttons in sequence.
TIP
Don’t allow more than one second between button presses.
Raising and lowering the stand
To raise the stand
1. Lift up and hold the control switch.
The stand rises.
2. Release the control switch to stop raising the stand.