Page 24
If these menus are PIN protected, it is necessary to enter the correct PIN before accessing the
various menu items.
Setting the Clock
Press the
<F2>
“Schedule” button.
If you are prompted to
enter a PIN, see “The PIN Prompt” on page
23
.
Depending
on values set within the Viking installer menu you will be
presented with a number of options. Use the
[SELECT]
button to highlight the word “CLOCK” and
then press the
[SET]
button.
Use the
[SELECT]
button to advance through the various parameters such as Date, Month, Year,
Hour and Minute and then adjust these values with the
UP
/
DOWN
buttons to the desired value.
(The Viking will calculate the day of the week)
Press
[SAVE]
to save the new time parameters and exit the menu. The
[REJECT]
button will exit this
menu discarding changes.
Setting Daily Schedules
The
Viking can be individually programmed to “Start” and “Stop” the building’s HVAC system at a
separate time for each day of the week if necessary.
When the Viking is in “Start” Mode it will use the “Start” program set temperatures (See Setting
the “Start”
Set Temperatures on page 24
) and when in the “Stop” Program Mode it will use the
Setback set temperatures as set by the installer (see Setting the Setback Temperatures on page 15).
This provides around the clock temperature control.
Additionally, the Viking has an inbuilt “after hours” run timer that can be manually initiated where
the “Stop” program temperatures are temporarily replaced with the “Start” program temperatur
es
for a predetermined period of time; typically 2 hours. (See the After Hours Function on page 15 for
setting the parameters for this function).
Note:
Each daily schedule must start and end on the same day. You cannot set a schedule to start at
2pm Wednesday and end at 3am Thursday. To program past midnight see Tips and Tricks on page
31 of this manual.
Setting a “Start” schedule time and “Stop” schedule time
at the same time
will cancel the schedule for that day,
i.e. 8:00am start and 8:00am stop.
Press the
<F2>
“Schedule” button for 1 second.
If you are
prompted to enter a PIN, see “T
he PIN
Prompt” on
page 23
.
Depending on values set within the Viking installer menu you will be presented
with a number of options. Use the
[SELECT]
button to
highlight the word “Schedule” and then press the
[SET]
button to enter the 7 day programming menu.
You will be presented with the option to start / edit the
program on Monday or select another day using the
UP
/
DOWN
buttons then press
[NEXT]
to proceed.
