background image

 

Introduction

Important Information

Read This Section First

Before you install and use your SMART Board™ 600i3 or SBD600i3 interactive 
whiteboard system, read and understand the safety warnings and precautions in this 
user’s guide, your projector user’s guide and the included 

warnings document

. These 

safety warnings and precautions describe the safe and correct operation of your 
interactive whiteboard system and its accessories, helping you to prevent injuries and 
equipment damage. You must always ensure that your interactive whiteboard system 
is being used correctly. 

NOTE

If you own a SMART product other than a SMART Board 600i3 or SBD600i3 
interactive whiteboard system, refer to the installation guide for your product 
for relevant warnings and maintenance instructions.

In this document, “SMART Board 600i3 interactive whiteboard system” or 
“SMART Board SBD600i3 interactive whiteboard system” refers to your 
SMART Board 600 or SBD600 series interactive whiteboard and its UF55/UF55w 
projector, accessories and optional equipment. 

The UF55/UF55w projector included with your system is designed to work only 
with certain SMART Board interactive whiteboard models. Contact your 

authorized 

SMART reseller

 for more information.

Summary of Contents for Board SBD600 Series























































































Reviews: