User Guide
P.15
Multi-car Operation
This option allows the owner of two vehicles, both equipped with the same Remote Car Starter
model, to control both systems with a single remote control.
To control the second vehicle:
Press
TRUNK
+
LOCK
buttons simultaneously
:
-------------------------------------------------------
LOCK
Press
TRUNK
+
UNLOCK
simultaneously
:
-------------------------------------------------------------
UNLOCK
Press
TRUNK
+
START/STOP
simultaneously: -------------------------------------------------------
START
Press
TRUNK
+
START/STOP
simultaneously: -------------------------------------------------------
STOP
Press
AUX
¾
¾
AUX
¾
TRUNK
: -----------------------------------------------------------------------------
TRUNK
OR
Press
AUX
¾
AUX
¾
LOCK
: -------------------------------------------------------------------------------
LOCK
Press
AUX
¾
AUX
¾
UNLOCK
: --------------------------------------------------------------------------
UNLOCK
Press
AUX
¾
AUX
¾
START/STOP
: --------------------------------------------------------------------
START
Press
AUX
¾
AUX
¾
START/STOP
: --------------------------------------------------------------------
STOP
Press
AUX
¾
AUX
¾
TRUNK
: -----------------------------------------------------------------------------
TRUNK
Note:
If the multi-level features have been modified from their default state by your installer, the
AUX
button may have to be pressed once, twice or three times, according to the option you chose.
OEM-Style Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned into the
IGNITION ON
position.
x
To arm the OEM-style alarm, press the
button
on
the transmitter.
-The OEM-style alarm will ONLY arm if the
button on the transmitter is pressed.
The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed.
x
To disarm
the OEM-style alarm, press the
button on the transmitter.
-To stop the horn from sounding if the OEM-style alarm is triggered, press the
or
button, or put the system in and out of
Valet Mode
(See page 9).
Intrusion Codes via horn
The system monitors the following:
x
Doors
x
Hood
x
Ignition
Note:
If an intrusion has occurred the HORN will sound for a maximum of 1 minute.
If an intrusion has occurred and
pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
1x = power interruption
4x = Doors intrusion
3x = Hood
6x = Ignition
P.6
User Guide
Arming and disarming the starter kill (if installed)
This added security feature will prevent the vehicle from starting with the Ignition key when the
starter kill is armed. If the system was installed with the starter kill option, the vehicle will not be
able to start with the key unless the system has been unlocked first or put into Valet Mode
(page 9).
Note:
If the Starter Kill is installed, the vehicle will benefit from a protection against starter motor
damage that could occur after remote-starting the engine should the user, by force of habit, turn
the ignition key to the
CRANK
position.
The Starter Kill (if installed) can be configured by the installer either to Passive Mode (so as to arm
automatically) or Active Mode (so as to require the user’s intervention for arming). By default, the
Remote Car Starter is configured to Passive Mode.
Passive mode:
To
arm
the Starter Kill:
x
Press the
button on the transmitter.
OR
x
Let the Starter Kill arm automatically 1 minute (by default) or 3 minutes (if configured this way)
after the ignition is turned
OFF
or once the last door is closed (if the doors are monitored). The
parking lights will flash once.
x
The LED on the antenna will flash quickly during the countdown preceding the activation
of the Starter Kill.
x
Once the activation countdown expires, the LED will send a series of quick double
flashes to indicate that the Starter Kill is now armed.
To
disarm
the Starter Kill:
x
Press the
button on the transmitter.
x
The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if
configured this way) if no door is left opened (if the doors are monitored) and the ignition
is
not
turned
ON
.
Active Mode:
To arm the Starter Kill:
x
Press the
button on the transmitter.
x
The parking lights will flash once.
x
The LED on the antenna will flash slowly.
x
If remote door locks are installed, this will also lock the doors and arm the OEM-style
alarm (if configured).
To disarm
the Starter Kill:
x
Press the
button on the transmitter.
x
The parking lights will flash twice.
x
The LED on the antenna will remain
OFF
.
x
If remote door locks are installed, this will also unlock the doors and disarm the OEM-
style alarm (if configured).
