― 13 ―
Smart Start, Inc.
IN-HOM S.M.A.R.T. Mobile
User’s Manual
message summary below for more information on a violation.
5)
“
Face Not Detected
– Please Retry
” means the device did NOT
detect a human face while the test was taken. Make sure the
room has good lighting and do not cover the camera. In an open
test window, you will be required to provide another test. Please
see figure 4 for the proper facial position for testing.
IN-HOM S.M.A.R.T. Mobile Display Messages
1.
Charging
– Please Wait
: The battery needs to be charged.
2.
Initializing
: The unit is initializing.
3.
Ready - Next Test: (mm/dd hh:mm)
: The unit is ready to
accept a breath test and the next test time is displayed
4.
Test Required
– Please Blow
: A test window is open and you
are required to provide a passing test before the timer counts
down to zero.
5.
Testing
– Keep Blowing
: Testing is in progress.
6.
Analyzing
– Please Wait
: The unit is processing the breath
sample.
7.
Passed
:
The test is complete and the alcohol content of
the sample is considered passing.
8.
Warning
: This means the test is complete and the device
measured some level of alcohol
– but, not enough to cause a
failure. You will NOT be required to take additional tests. But, if
you are on a zero-tolerance program, this test will still be reported.
9.
FAILED
:
This means the test is complete and the alcohol
content of the sample is considered a failed test. You will be
required to take additional tests to provide a passing test. Wait
for the unit to display “Ready” or “Test Required – Please Blow”
and take the test again.
10.
VIOLATION
: This means the test is complete and the alcohol
content is considered a violation. You will be required to take
additional tests to provide a passing test. Wait for the unit to
display “Ready” or “Test Required – Please Blow” and take the
test again.
11.
Missed Test
: This means that the user did not provide a passing
test during a required test window.
12. No Face Detected - Please Retry:
This means that the device
did NOT detect a human face while the test was taken. Make
sure the room has good lighting and do not cover the camera. In