User Guide
P.9
FBPRO
(15)
Button Function:
The order of LEVELS and MENU can be re-arranged using the
Button Function
Menu. Details on (page-18).
F Button Function
Menu
FBPRO
Function Button Programming
Function Button
programming
1 2 3 M
2 3 1 M
3 1 2 M
2 1 3 M
M 1 2 3
Level 1, level 2, level 3, MENU
Level 2, level 3, level 1, MENU
Level 3, level 1, level 2, MENU
Level 2, level 1, level 3, MENU
MENU, level 1, level 2, Level 3
Remote
Starting
Your
Vehicle
Setting
Your
Vehicle
Into
Ready
Mode
If your vehicle has a manual transmission you must read the following indications. The unit must
first be set to Ready Mode in order to start the vehicle by remote. If the unit is not set to Ready
Mode, it cannot remote start the vehicle. Please note that Ready Mode can be enabled by the
remote or the handbrake, depending on the option that was selected by your installer. Therefore,
you must follow the appropriate procedure between the two described below in order to set your
vehicle into Ready Mode.
Once the system is set to Ready Mode, the vehicle can be remote started and stopped at any time.
The system will exit Ready Mode if a door, the hood or the trunk is opened, if the brake pedal is
pressed, if the parking brake is disengaged or if the ignition key is turned to the IGNITION ON
(RUN) position.
To set the system to Ready Mode:
If Ready Mode is enabled by remote
If Ready Mode is enabled by handbrake
1.
Ensure that all the doors, hood and trunk are closed. Make sure that the gear selector is in the
neutral position.
2.
With the engine running, apply the parking
brake once and release the brake pedal.
3.
Within 20 sec. of engaging the parking
brake, press and hold
,
or
on
the transmitter (SmartStart™ uses only the
SmartStart™ icon).
The parking lights will flash 3 times quickly
and remain lit. Release the button.
2.
With the engine running, apply the parking
brake twice within 10 sec.
3.
Make sure to release the brake pedal.
The parking lights will flash 3 times quickly
and remain lit.
4.
Remove the key: the engine will keep on running.
5.
Exit the vehicle. All doors should be closed, including the hood and trunk.
6.
THERE ARE THREE POSSIBLE OPTIONS TO COMPLETE READY MODE (programmable
by installer)
OPTION 1: No lock
OPTION 2: Manual shut down
(default)
OPTION 3: Automatic shut
down
The engine stops.
The engine keeps going until you
press either;
a.
to lock the doors and shut
down the engine;
The engine runs for 8 sec.
then locks the doors before
finally shutting down the
engine, without user
